Granite Chip: Critical Mass drop in

$225.00

Critical Mass — Granite Chip Camo Edition

Engineered for extremes, the Granite Chip Camo Critical Mass system brings the heat of battlefield grit to TacticalPontoon precision. This limited-run finish layers rugged desert-chip camouflage over the hand-tuned internals of the Critical Mass platform, delivering crisp break, disciplined control, and drop-in reliability for Glock Gen 1–5.

Built for shooters who demand performance that holds its ground when the sun is unforgiving and the terrain fights back.

Mission-ready. Critical Mass — no second chances.

Note from TacticalPontoon: If you love the Critical Mass system, this is the granite chip camo version

Fits: Gen 1–5 (Excludes G43/43x/48, CR920, – [Get those here]) For .45/10mm you want the Hammer System

⚠️*All triggers need to be installed by a qualified gunsmith/Glock armorer. Tacticalpontoon will not be responsible for incorrect installation. All safety checks must be verified and tested after install. *⚠️

Description

The Critical Mass— TacticalPontoon- Precision. Zero Compromise.

Born from the Atomic Age of innovation and the battlefield grit of the Peacemaker legacy, the Critical Mass  System represents the perfect fusion of control and chaos. Every component is hand-tuned to TacticalPontoon standards — polished contact points, tuned connector geometry, and balanced springs that deliver a break so sharp it feels like a scientific event.

Designed as a drop-in system for Glock Gen 1–5, the Critical Mass is the moment before detonation — smooth, deliberate, and ready to unleash measured precision at your command. Whether you run competition, carry, or collector builds, this system transforms your platform into something engineered, not assembled.

You’re standing at the threshold between exceptional and elite. The next step after Critical Mass is the Heisenberg Competition System — but until then, this is your launch sequence.

What’s Included

  • 3.0 lb rated break (option to go lighter with the Elite Marksman Competition spring kit)

  • World Famous Peacemaker trigger shoe with camo by Sapper Tactical (You can get an entire build done with his work by clicking the link)

  • Custom-polished & tuned trigger bar

  • Race-tuned, polished connector

  • Trigger spring 

  • Duty-rated striker spring

  • Gen 1–3 builds include Gen 4/5 ejector upgrade for improved ejection (where applicable)

  • Badger Snot applied to connector & trigger bar

 


Compatible With (Gen 1–5 Glock frames & common compatible platforms(Shadow Systems XR/MR/DR,Grit Grips,SCT 19/17/Dagger Compact and Full size)

(Also compatible with many similar platforms—verify fit on the product page. Not compatible with micro (CR920/SCT43SC/Micro Dagger/ G43x)or non-Glock-specific frames; check model compatibility before ordering.)


Why Peacemaker 3.0?
This is not a mass-produced drop-in. The Peacemaker is a small-batch, hand-tuned system that gives you the refined control of a purpose-built trigger—think supercar-level engineering for your Glock. If you want responsive, reliable, and refined performance without sacrificing safety, this is your upgrade.


Shipping & Lead Time
Hand-built in limited runs. Lead times apply but usually ships within a few days—the best parts take time to make. If you’re shopping on price alone, this isn’t for you. If you want the best, place your order now.


Install & Safety Note:
Always follow the install instructions on the TacticalPontoon Instructions & Troubleshooting page and perform a full function and safety check after installation. We recommend a qualified gunsmith or certified Glock armorer if you are not experienced with Glock disassembly/assembly.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK, Inc. “GLOCK” is a registered trademark of GLOCK, Inc. TacticalPontoon is not affiliated with or endorsed by GLOCK. Use of the term “Glock” is for compatibility reference only.

The TacticalPontoon Story:

I never saw myself building trigger systems. I picked up my first G17 and naturally being a bit of a tinkerer, I wanted to do a few upgrades. Of course, the trigger was the first thing that saw an ‘upgrade’ however that led me down a path that kept me searching for something better. I bought connectors, springs, and so many triggers and systems…..yet I was left scratching my head. There was so much money spent on marketing that the engineering of the parts themselves were lacking and I was very unsatisfied with the results. I found that so many parts were exactly the same and triggers were skin deep changes with the basic operations being the same. There had to be better and I was determined to figure out how to do it……and that led me to studying the components design and operation. I ruined quite a few parts along the way, changing things, tuning and tweaking components until they didn’t work or until I found something that worked to my standards. That led to the original Elite Marksman triggers that were featured on Tactical Toolbox. I just wanted Jonathon to check my work out and when the video hit Youtube, I was inundated with people who wanted the trigger system that impressed him like it did. Before I knew it, I was busy building triggers that amazed people who, like me, were not satisfied with the status quo. That has led me to upgrade and redesign the work that I do to continue to push the limits. I take great pride in creating the best and nothing comes close to TacticalPontoon.

Additional information

Generation

Gen 1-3 (including Dagger and P80's), Gen 4 (including Shadow Systems EXCEPT CR920), Gen 5

Safety color

gold, copper, black, grey

Reviews

There are no reviews yet.

Be the first to review “Granite Chip: Critical Mass drop in”

Your email address will not be published. Required fields are marked *

You may also like…