Verifying and adjusting sear engagement.

Sometimes, in some frames, the sear/cruciform to striker lug engagement is not up to spec. This can be a dangerous condition and should be rectified as soon as possible. Our triggers are meant to be installed by competent armorer’s and gunsmiths, but for educational purposes I will link to an excellent video on how these operations are performed. A big thanks to Johnny Glock’s for putting out years of excellent information on the subject!!

1 Comment

  1. Shane Hammill on July 2, 2021 at 9:49 pm

    Thank you for sharing! I just put together a p80 and chased and chased this problem, after tweaking the sear a little the problem is gone! Still want to check with spring tension and a half cover to verify at least 2/3 engagement

Leave a Comment





eighteen − seven =