Shredder Competition System
Price range: $350.00 through $365.00
Fast enough to win. Refined enough to collect. The Shredder Competition System combines TacticalPontoon’s obsessive attention to detail with a competition-focused trigger that delivers reduced pre-travel, a clean break, and an exceptionally fast reset. Hand-built one at a time and offered in rotating color combinations, every Shredder is built to perform—and built to stand out.
Built to Shred the Competition.
Description
Some trigger systems are built to perform.
Leave Nothing Standing.
Includes:
- 3.5 rated weight
- Viper Competition system Pre-travel reduction
- Adjustable overtravel stop Shredder/Viper block housing
- Competition trigger spring
- Duty-rated striker spring
- Reduced-power striker plunger spring
- Badger Snot applied to critical contact surfaces
- Shredder collector tin and serialized card
Every Glock has a trigger.
Very few have a TacticalPontoon.
Compatible With (Gen 1–5/V Glock frames & common compatible platforms(Shadow Systems XR/MR/DR,Grit Grips,SCT 19/17/Dagger Compact and Full size) The Gen 6 is not included unfortunately.
(Also compatible with many similar platforms—verify fit on the product page. Not compatible with micro (CR920/SCT43SC/Micro Dagger/ G43x)or non-Glock-specific frames; check model compatibility before ordering.)
Shipping & Lead Time
Every Shredder Competition is built by hand and current build time is approximately three weeks. Great things aren’t rushed, and neither is this trigger system.
Installation & Safety Notice
TacticalPontoon trigger systems are precision firearm components and should be installed only by a qualified gunsmith or certified Glock armorer. The installer is solely responsible for verifying proper installation, confirming compatibility with the firearm, and performing all required function and safety checks before the firearm is loaded or fired.
After installation, the firearm must be thoroughly inspected and tested to ensure all factory safety mechanisms operate correctly, including proper trigger reset, trigger safety engagement, striker safety function, and safe operation. Do not use the firearm if any safety check fails.
TacticalPontoon is not responsible for damage, injury, or malfunction resulting from improper installation, improper maintenance, unauthorized modification, use of incompatible components, misuse, or failure to perform required safety and function checks. By installing or using this product, the purchaser assumes all responsibility for the safe installation, inspection, testing, and operation of the firearm.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK, Inc. “GLOCK” is a registered trademark of GLOCK, Inc. TacticalPontoon is not affiliated with or endorsed by GLOCK. Use of the term “Glock” is for compatibility reference only.
The TacticalPontoon Story: I never saw myself building trigger systems. I picked up my first G17 and naturally being a bit of a tinkerer, I wanted to do a few upgrades. Of course, the trigger was the first thing that saw an ‘upgrade’ however that led me down a path that kept me searching for something better. I bought connectors, springs, and so many triggers and systems…..yet I was left scratching my head. There was so much money spent on marketing that the engineering of the parts themselves were lacking and I was very unsatisfied with the results. I found that so many parts were exactly the same and triggers were skin deep changes with the basic operations being the same. There had to be better and I was determined to figure out how to do it……and that led me to studying the components design and operation. I ruined quite a few parts along the way, changing things, tuning and tweaking components until they didn’t work or until I found something that worked to my standards. That led to the original Elite Marksman triggers that were featured on Tactical Toolbox. I just wanted Jonathon to check my work out and when the video hit Youtube, I was inundated with people who wanted the trigger system that impressed him like it did. Before I knew it, I was busy building triggers that amazed people who, like me, were not satisfied with the status quo. That has led me to upgrade and redesign the work that I do to continue to push the limits. I take great pride in creating the best and nothing comes close to TacticalPontoon.
Additional information
| Generation/model | Glock Gen 1-3, Glock Gen 4, Glock Gen 5 (The 19x is a Gen5), GenV (Yes even the G19XV), Shadow Systems DR/MR/XR, Nomad 9/9X/9F, Grit Grips g19, SCT 19, Zev OZ9 |
|---|---|
| Color | Ninja Black w/purple safety, Ninja Black and chrome w/purple safety, Ninja Black w/red safety, Ninja Black and chrome w/red safety, Ninja Black w/black safety, Ninja Black and chrome w/red safety Ninja Black w/copper safety, Ninja Black and chrome w/copper safety |
1 review for Shredder Competition System
Related products
-
Pontoonize Your Trigger
$155.00 Add to cart -
The Hammer System (.45/10mm)
$255.00 Select options This product has multiple variants. The options may be chosen on the product page -
The Hammer System Gen5 & V(.45/10mm)
$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Restricted content
$270.00 Select options This product has multiple variants. The options may be chosen on the product page
gkischer –
Just a small nudge down from the Viper, this system is incredible. Love the lack of pre travel on this setup. Incredible that one guy runs a shop with multiple trigger systems, all have their purpose and feel different, and all of them are ridiculously good. Mind blowing stuff.