Jelly & Peanut Butter Heisenberg Competition
$280.00
Heisenberg System — Jelly & Peanut Butter
Familiar flavor. Uncompromising bite.
Taking inspiration from the unmistakable Smucker’s Goober peanut-butter-and-jelly swirl, the Goober Edition Heisenberg System pairs playful nostalgia with TacticalPontoon’s most aggressive trigger geometry. The warm, two-tone finish catches the eye—but what happens under pressure is all business.
Expect a defined wall, a sharp, authoritative break, and a reset that snaps back with zero hesitation. This is the Heisenberg you trust, dressed in a finish that doesn’t take itself too seriously—while still delivering performance that absolutely does.
Looks nostalgic. Shoots ruthless.
Because even comfort food can hit hard when it’s built right.
Pairs awesome with the Goober +5 mag extension (in the picture but not included….however can be ordered here)
Fits: Gen 1–6/V (Excludes G43/43x/48, CR920, – [Get those here]) For .45/10mm you want the Hammer System
⚠️*All triggers need to be installed by a qualified gunsmith/Glock armorer. Tacticalpontoon will not be responsible for incorrect installation. All safety checks must be verified and tested after install. *⚠️
Description
The Heisenberg— TacticalPontoon- Precision. Zero Compromise.
What’s Included
-
3.5 lb rated break (option to go lighter with the Elite Marksman Competition spring kit)
-
World Famous Peacemaker trigger shoe with that Grape Jelly look and PB safety
-
Custom-polished & tuned trigger bar
-
Race-tuned, polished connector
- Adjustable overtravel stop (Gen 6 does not include this)
-
Trigger spring
-
Duty-rated striker spring
-
Gen 1–3 builds include Gen 4/5 ejector upgrade for improved ejection (where applicable)
-
Badger Snot applied to connector & trigger bar
- Gen6 will be the Heisenberg kit that includes everything but the trigger block housing. You will need to reuse your own.
Compatible With (Gen 1–6Glock frames & common compatible platforms(Shadow Systems XR/MR/DR,Grit Grips,SCT 19/17/Dagger Compact and Full size)
(Also compatible with many similar platforms—verify fit on the product page. Not compatible with micro (CR920/SCT43SC/Micro Dagger/ G43x)or non-Glock-specific frames; check model compatibility before ordering.)
Shipping & Lead Time
Hand-built in limited runs. Lead time is 2 weeks—the best parts take time to make. If you’re shopping on price alone, this isn’t for you. If you want the best, place your order now.
Install & Safety Note:
Always follow the install instructions on the TacticalPontoon Instructions & Troubleshooting page and perform a full function and safety check after installation. We recommend a qualified gunsmith or certified Glock armorer if you are not experienced with Glock disassembly/assembly.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK, Inc. “GLOCK” is a registered trademark of GLOCK, Inc. TacticalPontoon is not affiliated with or endorsed by GLOCK. Use of the term “Glock” is for compatibility reference only.
The TacticalPontoon Story:
I never saw myself building trigger systems. I picked up my first G17 and naturally being a bit of a tinkerer, I wanted to do a few upgrades. Of course, the trigger was the first thing that saw an ‘upgrade’ however that led me down a path that kept me searching for something better. I bought connectors, springs, and so many triggers and systems…..yet I was left scratching my head. There was so much money spent on marketing that the engineering of the parts themselves were lacking and I was very unsatisfied with the results. I found that so many parts were exactly the same and triggers were skin deep changes with the basic operations being the same. There had to be better and I was determined to figure out how to do it……and that led me to studying the components design and operation. I ruined quite a few parts along the way, changing things, tuning and tweaking components until they didn’t work or until I found something that worked to my standards. That led to the original Elite Marksman triggers that were featured on Tactical Toolbox. I just wanted Jonathon to check my work out and when the video hit Youtube, I was inundated with people who wanted the trigger system that impressed him like it did. Before I knew it, I was busy building triggers that amazed people who, like me, were not satisfied with the status quo. That has led me to upgrade and redesign the work that I do to continue to push the limits. I take great pride in creating the best and nothing comes close to TacticalPontoon.
Additional information
| Generation | Gen 1-3 (including Dagger and P80's), Gen 4 (including Shadow Systems EXCEPT CR920), Gen 5, Gen 6 kit, Gen V |
|---|
You may also like…
-
Heisenberg Competition Trigger System
$275.00 Select options This product has multiple variants. The options may be chosen on the product page -
Heisenberg Daily Trigger System
$255.00 Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
The Hammer System (.45/10mm)
$255.00 Select options This product has multiple variants. The options may be chosen on the product page -
Granite Chip: Extreme Carry slimline
$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Peacemaker ‘Critical Mass’ system
$195.00 Select options This product has multiple variants. The options may be chosen on the product page -
Restricted content
Price range: $195.00 through $275.00 Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.