Granite Chip: Heisenberg Competition
$290.00
⚡ Heisenberg — Granite Chip Camo Edition ⚡
Engineered for extremes, the Granite Chip Camo Heisenberg system brings the heat of battlefield grit to TacticalPontoon precision. This limited-run finish layers rugged desert-chip camouflage over the hand-tuned internals of the Heisenberg platform, delivering crisp break, disciplined control, and drop-in reliability for Glock Gen 1–5.
Built for shooters who demand performance that holds its ground when the sun is unforgiving and the terrain fights back.
Mission-ready. — no second chances.
Note from TacticalPontoon: This is the world famous TacticalPontoon trigger system in Granite chip camo.
Fits: Gen 1–5 (Excludes G43/43x/48, CR920, – [Get those here]) For .45/10mm you want the Hammer System
⚠️*All triggers need to be installed by a qualified gunsmith/Glock armorer. Tacticalpontoon will not be responsible for incorrect installation. All safety checks must be verified and tested after install. *⚠️
Description
The Heisenberg— TacticalPontoon- Precision. Zero Compromise.
What’s Included
-
3.5 lb rated break (option to go lighter with the Elite Marksman Competition spring kit)
-
World Famous Peacemaker trigger shoe with camo by Sapper Tactical (You can get an entire build done with his work by clicking the link)
-
Custom-polished & tuned trigger bar
-
Race-tuned, polished connector
- Adjustable overtravel stop
-
Trigger spring
-
Duty-rated striker spring
-
Gen 1–3 builds include Gen 4/5 ejector upgrade for improved ejection (where applicable)
-
Badger Snot applied to connector & trigger bar
Compatible With (Gen 1–5 Glock frames & common compatible platforms(Shadow Systems XR/MR/DR,Grit Grips,SCT 19/17/Dagger Compact and Full size)
(Also compatible with many similar platforms—verify fit on the product page. Not compatible with micro (CR920/SCT43SC/Micro Dagger/ G43x)or non-Glock-specific frames; check model compatibility before ordering.)
Shipping & Lead Time
Hand-built in limited runs. Lead time is 2 weeks—the best parts take time to make. If you’re shopping on price alone, this isn’t for you. If you want the best, place your order now.
Install & Safety Note:
Always follow the install instructions on the TacticalPontoon Instructions & Troubleshooting page and perform a full function and safety check after installation. We recommend a qualified gunsmith or certified Glock armorer if you are not experienced with Glock disassembly/assembly.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK, Inc. “GLOCK” is a registered trademark of GLOCK, Inc. TacticalPontoon is not affiliated with or endorsed by GLOCK. Use of the term “Glock” is for compatibility reference only.
The TacticalPontoon Story:
I never saw myself building trigger systems. I picked up my first G17 and naturally being a bit of a tinkerer, I wanted to do a few upgrades. Of course, the trigger was the first thing that saw an ‘upgrade’ however that led me down a path that kept me searching for something better. I bought connectors, springs, and so many triggers and systems…..yet I was left scratching my head. There was so much money spent on marketing that the engineering of the parts themselves were lacking and I was very unsatisfied with the results. I found that so many parts were exactly the same and triggers were skin deep changes with the basic operations being the same. There had to be better and I was determined to figure out how to do it……and that led me to studying the components design and operation. I ruined quite a few parts along the way, changing things, tuning and tweaking components until they didn’t work or until I found something that worked to my standards. That led to the original Elite Marksman triggers that were featured on Tactical Toolbox. I just wanted Jonathon to check my work out and when the video hit Youtube, I was inundated with people who wanted the trigger system that impressed him like it did. Before I knew it, I was busy building triggers that amazed people who, like me, were not satisfied with the status quo. That has led me to upgrade and redesign the work that I do to continue to push the limits. I take great pride in creating the best and nothing comes close to TacticalPontoon.
Additional information
| Generation | Gen 1-3 (including Dagger and P80's), Gen 4 (including Shadow Systems EXCEPT CR920), Gen 5 |
|---|---|
| Safety color | gold, copper, black, grey |
You may also like…
-
Heisenberg Competition Trigger System
$275.00 Select options This product has multiple variants. The options may be chosen on the product page -
Heisenberg Daily Trigger System
$255.00 Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
The Hammer System Gen5 & V(.45/10mm)
$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dagger Peacemaker Tune Up Kit
$135.00 Select options This product has multiple variants. The options may be chosen on the product page -
The Peacemaker Extreme Carry 43/43x/48/CR920X/Micro-Dagger/SCT43sc
$245.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Competition Trigger System (Extremely Limited)
Price range: $425.00 through $450.00 Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.