Gen 5 Competition trigger spring


Unlike the gen1-4 triggers, the gen 5 uses a captured trigger return spring in the trigger block housings. This spring is often changed out in the previous generations to drop the break weight down an extra 8oz-16oz when tuning a competition trigger. In order to add this ability to the gen 5’s, TacticalPontoon has tested and spec’d out this spring to make it happen!!



*All triggers need to be installed by a qualified gunsmith/Glock armorer. Tacticalpontoon will not be responsible for incorrect installation. All safety checks must be verified and tested after install. *



There are no reviews yet.

Be the first to review “Gen 5 Competition trigger spring”

2 × five =