TacticalPontoon Viper Competition Striker assembly

This the TacticalPontoon Viper lightweight competition striker assembly. (This is included in the Viper Competition system)

• Lighter weight than factory, but not weaker skeletonized designs
• Each striker is done by hand
• 4.5lb striker spring
• new striker sleeve and striker cups
• cleaned and polished striker lug for extremely crisp breaks when paired with TacticalPontoon systems
• Badger snot tube included to lubricate the trigger system while you are there
• Built to order and have a 2 week lead time

To verify your striker style (Especially with Shadow Systems,) use the pictures below to pick the version you need. Shadow Systems with flat tip strikers can use the Gen3 style striker.)

While stronger than standard lightweight strikers, do not use this for carry/duty weapons. These are for target/competition guns.

*All triggers need to be installed by a qualified gunsmith/Glock armorer. Tacticalpontoon will not be responsible for incorrect installation. All safety checks must be verified and tested after install. *