Skip to content

TacticalPontoon HK VP9/40 Reduced power sear spring



With a spring rate 3/4 that of factory, this spring allows you to simply reduce the trigger break on the VP series approximately 1.5lbs.

One half of the TacticalPontoon Elite Spring kit. Buy the full kit to reduce the takeup and break of the VP series trigger.

The VP9/40 is a relatively complex gun and requires care and attention to disassemble. It is recommended that a gunsmith install these parts. To familiarize yourself with the steps, the following link will show you the steps for VP9/40 disassembly. VP9/40 Disassembly


There are no reviews yet.

Be the first to review “TacticalPontoon HK VP9/40 Reduced power sear spring”

Your email address will not be published. Required fields are marked *

two × 3 =

Scroll To Top